Kind of a filler post here…but lately, I’ve been outfitting my pedals’ bypass indicators with these fresnel lens covers instead of bezels. Generally speaking, I think a lot of pedal manufacturers need to tone it down with the brightness of these LEDs. Perhaps it’s common that stage lights (or playing outdoors) warrant an annoyingly bright indicator, but I always felt it was overkill. If I ever ran into the issue, I’d just change the LED resistor to something higher, or I’d just swap the LED (usually water clear) to a diffused one.
Anyway, back to these lenses. I just think they look great. I really like the way they diffuse the light, even in cases where the LED is brighter than I’d normally like it.
This Foxpedal Refinery actually had a fresnel lens cover (flat version) for the LED, but I replaced it the one seen here and swapped the red LED with a warm white one. Since this pedal is always on, this LED is now like a mini lantern!
Pictured here is my newest completed pedal project. It’s the Aion Electronics Nimbus Overdrive. Recently I had built myself a Klon clone and found it useful enough to include in my rig. If you didn’t know, the Klon is kind of known for it’s prominent mid-hump EQ. At first, I wasn’t really too crazy about this, but ultimately I decided that the contrasting nature of the Klon to my other OD tones was a good thing and this secured it a space on my board.
While browsing the Aion Electronics shop, I came across the Nimbus. The one thing I really like about this site is that if a pedal has any interesting history/controversy at all, it will be clearly written about. Well, apparently, the Maxon OD-820 had some, and it had to do with the Klon. Continue reading Maxon OD-820 Clone: Aion Electronics “Nimbus”→
OK, this video is 75% the Klon clone, but I give Amp 11 and the Fuzz Tool Jr. a fair amount of play, I think.
Well, here are my thoughts on the Klon. First off, I have absolutely no first-hand experience with the real thing. But with this Klon clone being a part-for-part reproduction of the original, I trust that I’ve assembled something that sounds faithful to the genuine article. Continue reading Klon Clone Demo→
Shortly after sharing about my new mini-board (here), I acquired a Pluetoneum Chi-Wah-Wah V2 (careful…oddly nsfw) to complete and maximize the usefulness of my new mini setup. I didn’t really feel like posting about it, although I may do a more lengthy demo in the future. Other than that acquisition, it’s all been Boss mods and new complete builds. This one pictured above is one of my proudest completed projects.
Here’s my mini pedalboard mounted on a Pedaltrain Metro-16, one of their new offerings for 2015.
Previously, I had the old Pedaltrain Mini. Apparently, my model had gone through a couple of revisions. One of them is publicly known and visually obvious. The other, more or less nobody knows about and you really can’t tell just by looking at it. What it comes down to is that my Mini doesn’t accept any non-daisychain power supplies. Continue reading Pedaltrain Metro-16→
The innards of this Sho ‘Nuff (I really don’t like this name) boost are the same as the one I previous posted about. As I was trying to fit the original one onto my board, I ran into an issue where the DC jack located on top was problematic. So I ordered another enclosure, redrilled all the holes, and moved the DC jack to the side. As you can see, I also went with a different color scheme, which I’m liking much more than the mint green w/ black knobs that I had before. It was too late for me to do any rearrangement on my board, but I’m fairly certain it will fit now.
I really like that the Mexican Strat maintains such modest prestige, yet it’s my favorite guitar to play at the moment. Over the weekend, I did my first modification(s) to it. Keeping the upgrades modest for the most part, this is what I installed: Continue reading First Upgrades→